Table of Contents
Advertisement
9
You can listen to an external audio device (e.g. MP3 player or a mobile phone) through this sound system.
1.
Connect the AUX input (3.5mm) on the functional controller to the audio output jack on your mobile phone,
using the following audio cable.
• For a mobile phone with 3.5mm headphone jack, use the 3.5mm audio cable (not included).
• For a mobile phone with USB-C port, use USB-C to 3.5mm cable (not included).
• For an iPhone with lightning connector, use lightning to 3.5mm cable (not included).
The sound system automatically switches to AUX input source. The source LED indicator on the functional
controller turns to red.
2.
Select and play audio files on your audio device. Audio from the connected device will be played on this
sound system.
To maximize audio performance, set the volume of the connected device to a minimum of 75%.
Ideally, on the highest volume setting you can get without distortion.
To resume Bluetooth connection, you must disconnect the AUX cable from the sound system.
Operating the sound system consumes the vehicle battery. To avoid battery exhaustion, be sure to run
the vehicle engine when operating the sound system.
Playback control
2
• To mute or un-mute volume, press
• To adjust volume, press / .
• To select the previous or next track, use the controls only on the connected device.
AUX
.
Source LED indicator
Advertisement
Table of Contents
