Introduction This multifunction cable tester and scanner kit is designed to test a range of RJ45 cables and patch leads as well as cables used in 10Base-T/100Base-T networks and telephone systems. It also features a cable finder function which is particularly useful for installers and IT workers, allowing them to identify and trace with ease, individual cables connected to the transmitter as far as 3km away.
Safety Rules and Warnings WARNING: These units must not be used to test powered circuits. As there is a risk of shock and damage to the equipment. Don’t store or leave the unit in direct sunlight, especially under glass. Don’t store in damp or excessively dusty environments or temperatures over 40oC.
Page 4
3. RJ45 Remote Cable Testing This function is ideal for testing network cable runs. It is also useful for testing connections between wall outlets and patch panels. 3.1. Connect the wall plate to the source RJ45 socket (2) on the transmitter unit using the RJ45 adaptor provided (see Fig.
Page 5
5. Using the Cable Finder Function This function is ideal for identifying cables and tracing network and other cable runs. WARNING: Do not connect to powered circuits. 5.1. Attach the cable or circuit you want to trace to the RJ11 or RJ45 socket on the transmitter unit, see Fig.