ZyXEL Communications Dimension ES-2024A Support Notes page 8

4. Use X-modem protocol to transfer (Receive File) the firmware.
5. Enter "ATGO" to restart the Switch after done uploading the configuration
file.
From Command Line FTP:
1. Download (and unzipped) the correct model firmware to your computer.
2. Launch the FTP client on your PC to login Switch. (From the command
prompt, type "ftp <Switch IP>"
3. Press "Enter" for the User name
4. Enter password to get the ftp prompt.
5. Enter "bin" to set transfer mode to binary.
6. Use "get" to transfer the firmware from the computer to the switch, for
example: "get rom-0 config.rom" transfers the firmware on your computer
(config.rom) to the switch and renames it "config.rom".
7. Enter "quit" to exit the ftp prompt.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
ES-2024 Series Switch Support Notes
8