Advertisement
Item | Description |
| USB port is for power charging or data transmission |
|
|
|
|
|
|
|
|
|
|
To enter the setting menu:
Settings menu:
Setting | Description | Options |
Video Resolution | The video resolution | 2560 x 1440 30P 2304X 1296 30P 1920 x 1080 30P (default) 1280 x 720 30P 848 x 480 30P |
Photo Resolution | The photo resolution | 5M (3008 x 1692 16:9) 12M (4608x259216:9) 20M (5984x336616:9) 25M (6656X374416:9) 30M (7296X4104 16:9) (default) |
Burst | The number of images captured in a row when you take a photo. | Off (default), 2, 3, 5, 6, 8, 10, 15, 20 |
Dewarp | When on, video distortion correction will be corrected, with more power consumption. | Off (default), On |
Self Timer | The time camera waits until taking a photo after you press Snapshot button. (only for photo mode) | Off (default), 5 Secs, 10 Secs, 20 Secs, 30 secs, 1 Min |
Quality | The quality of the video. | S. Fine (default), Fine, Normal |
Pre-record | When on, a certain time (depend on video resolution) will be combined into the recorded video before record button is pressed to start recording; When off, video start until the Record button is pressed to start recording. | Off (default), On |
Post record | The amount of the time the camera waits to stop recording video after you press the Record button. | Off (default), 5 Sec, 1 Min, 10 Mins, 20 Mins, 35 Mins |
CarDV Mode | When on, camera will power up automatically and start video recording when it is charged. Camera will power off as it normally does when it is disconnected from the power source. | Off (default), On |
Loop Recording | When on, camera will cover the oldest video file to save current video file once its memory is full. | Off, On (default) |
Split Time | While recording video, the camera will automatically split its recording into files of this length. | 1 Min, 3 Mins, 5 Mins, 10 Mins (default), 15 Mins, 20 Mins, 30 Mins, 45 Mins |
Slide show | When on, viewing photo file will start a slideshow where each photo will be shown for around 5 seconds. | Off (default), On |
Motion Detect | When on, camera will start recording when front movement is detected by the lens. | Off (default), On |
Record Warning | When on, you will hear a voice warning when you start recording. When off, voice warning is disabled. | Off (default), On |
Video Mute | When on, there is no sound in the video. When off, there is sound in the video | Off (default), On |
Language | The language of the text in camera interface | English (default), 简体中⽂, Pусский, Polski, 한국, French, ⽇本語, Portuguese, Español, Türk |
Screen Saver | Screen will be off to save battery without any operation | Off, 30 Secs, 1 Min, 3 Mins, 5 Mins (default) |
LCD Brightness | Screen lighting to view | Low, Medium, High (default) |
Key Tone | When on, camera will play a tone each time you press a button. When off, tone is disabled. | Off, On (default) |
Volume | The volume of camera speaker. It affects the loudness of video playback, audio playback, the key tone, record warning, and any other sounds played by camera. It doesn't affect the volume of the recorded video or audio files them selves. | 0-12 12 (default) |
Coding Format | The coding format of video files, With H. 265 compression, the file size is smaller, which can save memory space. However, the player that comes with the WINDOWS system cannot directly open the file. Try to use VLC media player or QuickTime Player. | H. 264 (default), H. 265 |
Time Set up | Adjust time to real location | уууу/mm/ddhh/mm |
ID Setting | User can set Device ID and Officer ID | Alphanumeric characters |
Password | If password is on, user needs to enter password to get access to setting and connection to PC | Off (default), On |
Change User Password | Password can be set or changed | Alphanumeric characters |
Default Setting | Use this to return camera to its original settings. It does not erase the memory | O (Yes), X (No) |
FW Name | Firmware version |
| Still Green: camera is in standby mode (Power on but not recording) Still Red: camera is on pre-recording mode Flashing Red: camera is recording video Flashing Yellow: camera is recording audio only Flashing Red Once: camera is taking photo |
| Still Red: Charging Status Still Green: Camera is fully charged |
Connect to the computer by the USB cable attached.
Then enter USB disk mode.
(If turn on "Password Protection" in the menu, need to in put the password you set first, (the default password is 000000) then could review or delete the files in the computer).
The default is password off, and if you need this function, turn on it in the menu, the default password is 000000, and if you forget your new password, enter NJMD07 to reset the camera password.
Press Power button to exit to previous interface when menu setting or playing back files
In standby mode, long press "Rec" to turn on/off the Audio; Short press "Down" button for taking photo.
When the loop record is on, the camera will cover previous files to save new file when the space is full.
If you don' t want certain files is covered, you can press "OK" button when recording as marked files. The screen will show a star as marked important file. Then this files won't be covered.
The default is 10 mins per video clip, if you want longer or shorter fragment, please go to menu "Split time" setting.
In standby mode, short press "OK" button to enter playback. Press "Rec" to select video, photo, audio option playback.
The battery is 2000mAh battery, support hours recording in 1080P and 3 hours charging. Please turn off the camera for charging.
Note:
Please charge camera fully after camera is left without working for long time.
To save the battery life, we set the device screen saver in 5 mins, and auto power off in 15 mins without any operation, if you don't like this, set it "off" in the menu.
If you have white screen or freeze, long Press Power button for 18s to reset the camera
Record resolution | GC4653 2M CMOS HD |
Chipset | Amba H22 |
Photo resolution | (5M/12M/20M/25M/30M) |
Record resolution | 2560x1440 30P /2304x129630P 1920x1080 30P/1280x72030P 848x480 30P |
Audio format | WAV |
Recording time | 7. 5 hours (1080P, fully charged, charged, IR off) |
Battery capacity | 2000mAh |
Charging time | 3 hours (power off states) |
Recording voice warning | On/off optional |
Screen auto off | 30s/1min/3min/5min |
UBS port | USB 2. 0 |
Angle degree | 125° |
Waterproof rate | IP54 |
Password protection | The file can only be deleted on computer after entering the password. When using the device, users can only browse files without deleting function |
Camera Size | 63x49x22mm |
Camera Weight | 74g |
Working temperature | -15~55°C (Very important, or the battery and camera will be damaged) |
Q: What is audio button?
A: Long press "Rec" to turn on/off the Audio in power on states
Q: The camera couldn't power on, stop working/white screen/freeze?
A: Connect the charger and cable to charge the device with 4 hours; Long press power button about 18s to reset the camera.
Q: Forget the password?
A: The default is password off, and if you need this function, turn on it in the menu, the default password is 000000, and if you forget your new password, enter NJMD07 to reset the camera password.
Q: A video or audio can not be played? Or no sound for videos?
A: Please check the menu and turn on the "Video Mute" function. Turn to the loudest volume of the Camera to check whether the sound could playback normally with the camera itself. It is recommended to playback videos/audio on the VLC media player or QuickTime Player.
Q: Why the screen turns off automatically?
A: The camera enters the LCD Auto Off mode in default Without 5 minutes operation. If you want the display Is always on, please enter the menu to set LCD Auto Off option to Off. LCD Auto Off option can be set to off/1min/3min/5min.
Q: Why does the camera shut off auto?
A: Please check whether the Auto Power Off option in The menu is auto power off in 15 mins without any operation. If you want the camera to stay power-on state, please enter the menu to set Auto Power Off to Off. Auto Power Off mode can be set to off/5min/10min/15min.
Q: The camera is stop recording after a coupon of hours?
A: To make sure the camera works well, fully charged 4-6 hours before recording, then check if the sd card is full memory. We advised to open the loop recording in the menu, then the recording will cover previous file to save more space.
Please note: Accessories may be updated without prior notice, please refer to the actual receipt of the items.
BOBLOV is dedicated to offer the best service to our valuable customer.
To reach BOBLOV customer service, please e-mail us:
Official Email address: Support@boblov.com
Official Website: www.boblov.com
Facebook: www.facebook.com/BOBLOVGlobal/
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the X2 that isn't answered in the manual? Leave your question here.