4.1 Accessing Your Prestige Via Web Configurator
Step 1.
Launch your web browser. Enter "192.168.1.1" as the web site address.
Figure 3 Entering Prestige LAN IP Address in Internet Explorer
Step 2.
Type the User Name and default password ("1234") in the Password field (in non-
readable format). Click Cancel to refresh the password screen without saving any
changes. Click OK to proceed to the Site Map.
Step 3.
You should now see the web configurator Site Map screen.
Click Wizard Setup to begin a series of screens to configure your Prestige for the first time.
Click a link under Advanced Setup to configure advanced Prestige features.
Click a link under Maintenance to see Prestige performance statistics, upload firmware and
back up, restore or upload a configuration file.
Click Logout in the navigation panel when you have finished a Prestige management session.
Prestige 792H
Console port using terminal emulation software
LAN or WAN using Telnet
Figure 4 Web Configurator: Password Screen
Web site address.
12
Default user name.