Minimum And Maximum Pan Size; Cookware Compatibility Indicator - LG LSIL6334FE Owner's Manual

34 OPERATION
If the problem is not corrected, the affected
cooking element will automatically deactivate after
one minute.

Minimum and Maximum Pan Size

There are four cooking elements on the induction cooktop. Each element requires a appropriate pan size
to be used effectively. The bottom size of the pan must be between the maximum and minimum diameter
for proper cooking to occur.
A
Cooking Area
a
b
c
d
The pan must make full contact with the glass surface without the bottom of the pan touching the metal
cooktop trim.
If the correct induction cookware—centered on any of the active cooking elements—is too small, the pan
does not heat.

Cookware Compatibility Indicator

The cookware compatibility indicator shows how
efficiently the cookware will heat on the induction
cooktop elements.
1
Turn off all cooktop elements in use.
2
Put enough water in the cookware to cover
the bottom. Place the cookware on the center
of the desired cooktop element.
• Select an element that is appropriate for the
size of the cookware.
Heater
Type Size (inch)
Induction
Induction
Induction
Induction
8 7.5 inch (190 mm)
11 9.5 inch (241 mm)
6 5.5 inch (140 mm)
6 5.5 inch (140 mm)
3
Set the power level on the selected element to
10.
4
Press Control Lock
same time for at least 3 seconds. The
indicator is shown on the display for 5
seconds.
Diameter of Pan Bottom
Min.
9.2 inch (224 mm)
11.8 inch (300 mm)
7.0 inch (178 mm)
7.0 inch (178 mm)
and START
a
A
Max.
at the
b