¡ You must check the alignment of the appliance
once it has been installed in the intended location.
Adjacent units
Any adjacent units must not be made of flammable ma-
terials.
¡ The fronts of any adjacent units must be heat-resist-
ant up to at least 90 °C.
¡ If the appliance is installed very close to other units,
the minimum clearances specified in the figure must
be complied with.
Note: Ensure that the clearance between the appliance
and the back wall is at least 10 mm.
Wall fixing
To prevent the appliance from tipping over, you must
fix it to the wall using the enclosed brackets. To secure
the appliance to the wall, follow the installation instruc-
tions.
Installation and connection en
11