Table of Contents
Advertisement
You will be asked to check if your antenna cable is
plugged properly into the antenna input socket on your
TV. Press Select to proceed.
Highlight the country that you are in and press Select.
Select your scanning preference to install channels.
Cable/TV and Satellite options will be available.
If the Cable/TV option is selected, the TV will search
for digital terrestrial and digital cable broadcasts. Select
the searching method on the next screen and press
Select to start search.
If the Satellite option is selected, you can choose an
operator on the next step, if any available. You can also
choose to perform full or manual scan. Highlight the
option you prefer and press Select button to proceed.
Satellite Connection screen will be displayed next.
Depending on your previous selections some options
may be preset automatically. Change if necessary
and proceed.
If you select Manual or Full option, you will have to
select the satellite in the next step. Then Satellite
Connection screen will be displayed. Set the LNB
Type, LNB Power, DiSEqC Version, Single Cable,
ToneBurst and Scan Mode options manually
corresponding to your environment on the next screen.
If you select Manual, you will need to configure the
Frequency, Polarisation and Symbol Rate options
additionally before the scan starts.
When complete press the Play/Pause button. The TV
will start to search available broadcasts.
You will be asked at some point whether you want to
clear existing channels, if you have installed channels
previously using the same search option. Highlight Yes
and press Select. All the previously tuned in channels
will be deleted. Highlight No, keep existing and press
Select to proceed without clearing existing channels.
While the search continues you can press the Select
button to cancel. When the search is completed the
results will be displayed. You can choose to make
changes on the channel list or rescan at this point.
Highlight Done and press Select to finish the setup.
Automatic Service Update
You can allow your TV to automatically scan for
network operator changes when TV enters standby
mode. Press Select to turn this feature on and off.
Favourite Channels
You can view and manage your favourite channels
here.
Highlight Favourite Channels and press Select.
If you do not have any favourite channels go to Manage
Channels menu to add channels. Then select the
source to view the channel list. Highlight a channel
and press Select to add this channel to your favourites.
If you have priorly added channels to your favourites
you can press Select to select the channels you want
to remove from your favourites. Then press Play/
Pause to confirm.
Manage Channels
Manage your favourite channels and select the
channels you want to display.
Highlight Manage Channels and press Select. Then
select the channel type. Terrestrial Channels, Cable
Channels and Satellite Channels options will be
available. Available options may differ depending on
the currently installed channel types.
You will now see the channel list with 3 tabs: All,
Favourites and Hidden.
All will show all the channels, Favourites will show all
the channels you marked as favourite channels and
Hidden will show all the hidden channels.
In the All tab you can choose to add a channel to the
favourites list by pressing Select or you can hide a
channel by pressing Play/Pause.
CI Card
Access your CI Card settings and information.
Parental Controls
Restrict over-the-air films, TV shows, purchasing and
certain types of content.
Highlight Parental Controls and press Select.
The default setting is Off so press Select to switch on.
Note: You will be asked to enter a PIN to turn the parental
controls on or off. This is the Prime Video PIN and it is related
to your Amazon account. If you have forgotten your PIN follow
the link shown on the screen to reset your PIN.
The first time you enable Parental Controls you'll
see some brief information about the settings. Press
Select to continue.
You'll now see all the settings that can be adjusted.
Highlight your desired setting and press Select.
Parental Controls: Press Select to switch parental
controls on or off.
PIN-Protect Purchases: Asks for a PIN before any
video, apps or games purchases. Press Select to
turn on or off.
Prime Video Ratings: Restricts viewing of videos
based on ratings. The default setting for General and
Family rating is On, for Teen, Young Adults and
Mature ratings is Off. Highlight the desired rating option
and press Select to change the setting.
Note: These settings apply to Prime Video (including Amazon
Channels). Content from other service providers may have
their own restriction settings.
Broadcast Ratings: Use ratings to restrict the viewing
of Live TV programmes from over-the-air broadcast
English - 18 -
(**) Limited Models Only
Advertisement
Table of Contents
