Table of Contents
Advertisement
Concerning the Display
About the spectrum display modes
The spectrum analyzer shows the level of each sound range with
four types of display described below. ([7] appears only when you
select the V. BASS mode.)
Press DISPLAY momentarily.
DISPLAY
Each time you press DISPLAY, the spectrum display will change as
follows.
|T|
Bar-type display
This display indicates the strength of the sound in each tonal range.
[2l Peak-hold display
The peak sound value of each sound range remains on the display
for about 1 second after it occurs.
iiiiiiiihiiiiiiiiii
[T1 Aurora display
The peak sound value of each sound range appears in inverted
form.
pjijljnnnnujr
l~4~l V. Bass-mode display
This display appears only when you select the V. BASS mode.
(See page 60.) It shows the strength of the augmented bass level.
Note:
When you press V. BASS to ON in any display modes, the bar-type
display will be switched to appear.
■ To display the equalization curve together with
the spectrum analysis display
Press and hold DISPLAY.
DISPLAY
The equalization curve will appear.
To resume the previous mode, press and hold DISPLAY once
again.
Advertisement
Table of Contents
