Table of Contents
Advertisement
• •• IL.
,
2)
□=)
O •••
—ri!
••O
— L_l
HD
—
—1
1-3D
— 00 Q)
j-r.
I
on o 1_
1 0
2 = 1
D =
BAND
Adjusting the bass/treble sound
1
Press DOLBY PRO LOGIC to select an appro¬
priate mode according to the types of speaker
setting you use.
(See page 61.)
2
Press BAND to select BASS or TREBL.
Each press of BAND advances the display as follows:
FLAT
—*
BASS
T
|
TREBL
*
-1
JOG MODE
| Adjusting the delay time_
(Also available from the remote control. For step 2, press one
of EFFECT to adjust the delay time.)
1
Press DOLBY PRO LOGIC to select an appro¬
priate mode according to the types of speaker
setting you use.
(See page 61.)
2
Turn JOG to adjust the delay time.
You can adjust bass/treble sound in succession. If necessary,
proceed to step 2 left.
BASS:
Bass sound
TREBL:
Treble sound
Equalization curve will appear in the Dolby Pro-Logic output
level display.
3
Turn JOG to adjust the level.
You can adjust the level within the range of ±10 dB.
■ To adjust the delay time in succession
1. Press JOG MODE to select EFFECT mode.
The bar under EFFECT lights.
2. Adjust the delay time using JOG.
■ To cancel the level adjustment
Press BAND to select "FLAT".
BAND
63
Advertisement
Table of Contents
