Table of Contents
Advertisement
To adjust the reverberation sound
(Also available from the remote control. For step 2, press one
of EFFECT to adjust the effect.)
You can adjust the reverberation sound of the desired simulated
listening environments (SFP).
1
Press SFP to select the desired simulated lis¬
tening environment.
Each press of SFP advances the simulated listening environ¬
ment setting in the following sequence.
HALL—► LIVE—- DISCO
(THTER) ■«-CHRCH
(THTER) is for model SH-CH750 only.
2
Turn JOG to adjust the reverberation sound.
O'
: To increase the effect
: To decrease the effect
The shape of the equalization curve will change as you adjust the
reverberation sound.
Such adjustments will not affect the preprogrammed simulated
listening environment.
You can adjust the reverberation sound within the range described
below.
HALL:
1.2-3.2 sec.
LIVE:
10-50 mm. sec.
DISCO:
0.5-2.5 sec.
CHRCH: 3.5-5.5 sec.
(THTER): 10-30 mm. sec.
(THTER) is for model SH-CH750 only.
■ To cancel the reverberation sound
(Also available from the remote control)
Press ON/FLAT.
^ ON/FLAT
J
The flat display will appear.
57
Advertisement
Table of Contents
