Chevrolet Camaro 2024 Owner's Manual page 41

40 Vehicle Care
Solvents or aggressive cleaners may harm
underhood components. The usages of these
chemicals should be avoided.
Recommend water only.
A pressure washer may be used, but care
must be utilized. The following criteria must
be followed:
Water pressure must be kept below
14 000 KPa (2,000 PSI).
Water temperature must be below 80 °C
(180 °F).
Spray nozzle with a 40 degree wide angle
spray pattern or wider must be used.
Nozzle must be kept at least 30 cm (1 ft)
away from all surfaces.
Finish Care
Application of aftermarket clearcoat sealant/
wax materials is not recommended.
If painted surfaces are damaged, see your
dealer to have the damage assessed and
repaired. Foreign materials such as calcium
chloride and other salts, ice melting agents,
road oil and tar, tree sap, bird droppings,
chemicals from industrial chimneys, etc., can
damage the vehicle's finish if they remain
on painted surfaces. Wash the vehicle as
soon as possible. If necessary, use
non-abrasive cleaners that are marked safe
for painted surfaces to remove foreign
matter.
Occasional hand waxing or mild polishing
should be done to remove residue from the
paint finish. See your dealer for approved
cleaning products.
Do not apply waxes or polishes to uncoated
plastic, vinyl, flat paint, or matte or textured
finishes as damage can occur.
Caution
Machine compounding or aggressive
polishing on a basecoat/clearcoat paint
finish may damage it. Use only
non-abrasive waxes and polishes that are
made for a basecoat/clearcoat paint finish
on the vehicle.
To keep the paint finish looking new, keep
the vehicle garaged or covered whenever
possible.
ZL1 1LE Spoiler
It is not recommended that the ZL1 1LE
spoiler be waxed, as it will change the gloss
level of the surface. In addition, care must
be used when waxing around the spoiler.
If a small amount of wax is applied to the
spoiler it can create an irregular appearance
to the surface of the panel. If wax, debris,
or other materials create stains on the
spoiler, see your dealer for the
recommended cleaner.
Fuel Spills
Wipe off fuel spills immediately to avoid
degrading the vinyl and adhesive. Then
wash, rinse, and dry.