Network Connection With Gsm Network (4G) - Seitz Roundshot Livecam Generation 4 Installation Manual

3.2 Network connection with GSM network (4G)

Please test the network connection in the office before installing the Livecam on
the mast. This avoids lengthy installations/deinstallations.
For Livecams that connect to the network by wifi or by mobile network a special
module needs to be installed in the camera computer. Please make sure to specify this
requirement when ordering the camera.
In this case, the Roundshot team will set the IP for the camera computer to DHCP
and preconfigure the APN settings of your data plan provider.
If it is necessary to reconfigure the APN settings, please set the IP to fixed (192.168.1.80,
see page 4 for instructions) and connect as follows:
Connect a laptop or other computer directly to the camera:
Ethernet patch (RJ45) cable
Set the IP of your computer (ethernet card) within the same range and subnet as the
camera, for example:
Installation Manual Roundshot Livecam Generation 4 - April 2024 - © by Seitz Phototechnik AG / Switzerland www.roundshot.com page 24