Advertisement
Quick Links
OPERATING INSTRUCTIONS – April 2023
Firstly, thank you for choosing a Robo-Tek Pool Cleaner, and welcome to our family.
At Robo-Tek we put ourselves in your position......and we don't like reading user
guides either !
Please take 3 mins to read through these brief instructions to ensure trouble free use,
and maximise the life span of your purchase.
What's in the Boxes?
Box 1
•
Partly assembled Caddy cart.
•
Box of screws and bolts.
Box 2
•
1 x Robo-Tek Robot
•
1 x Control box
•
2 Filter bags – (1x 70 Micron filter bag already fitted to the base plate and 1 x 20
micron filter bag for fine dust)
•
1 x remote control – (Battery already fitted)
•
1 x Impeller cover
EASY SET UP - Box 1
•
Undo the Caddy Box
•
Follow the instructions in the caddy box to assemble the caddy. (5 mins)
•
You will have 2 long screws left over (for the control box)
•
Place the caddy cart close by, we will need it again shortly
EASY SET UP - Box 2
•
Remove the Control box, Remote control, extra Filter bag
from the box.
•
Remove the robot from the box.
•
Cut the cable tie off the floating cable.
•
Attach the Control box to the Caddy, using the 4 long screws left
over from the Caddy Cart assembly.
•
Place the robot on the caddy, and wheel to the pool.
Robo-Plus V2
Advertisement
Related Manuals for ROBO-TEK Robo-Plus V2
Summary of Contents for ROBO-TEK Robo-Plus V2
- Page 1 Robo-Plus V2 OPERATING INSTRUCTIONS – April 2023 Firstly, thank you for choosing a Robo-Tek Pool Cleaner, and welcome to our family. At Robo-Tek we put ourselves in your position……and we don’t like reading user guides either ! Please take 3 mins to read through these brief instructions to ensure trouble free use, and maximise the life span of your purchase.
- Page 2 WHAT TO DO POOLSIDE • Remove the robot from the caddy and place in the water. • Turn the robot over to release excess air bubbles... • Squeeze the wheels to make them completely saturated. NOTE: If it doesn't sink right now..don't stress, we will sort that out a bit further down the page). •...
- Page 3 The default mode is floor only… (Blue Light for Floor only, changes to Green Light when in Climbing mode). 1. Let it clean the floor for the first 30mins. 2. Then : Stop the robot, remove it from the pool, empty the filter bag and then you can put on the climb mode.
- Page 4 Remote Control Instruction • Short Press will reverse direction of robot. • Long Press until robot turns then release. • Press to change time cycle. • Power on/off. • Not used. • Short Press will turn On/Off the climb mode.