Yamaha EMT-1 User Manual page 2

Thank you for purchasing a Yamaha EMT-1 FM Sound Expander. The EMT-l is a sophisticated but easy-to-use FM Sound
Expander
designed primarily for use with Yamaha Clavinova, PortaTone
and PortaSound instruments, and which
incorporates the very latest Yamaha digital synthesis technology. Original Yamaha FM tone generator technology delivers
a wide range of rich, vibrant voices that can significantly enhance the musical scope of keyboards that feature the MIDI
interface. In order to obtain maximum performance, we urge you to read this User's Manual thoroughly before using your
EMT-1, and keep the manual in a safe place for later reference.
| Contents
| Precautions ... READ THIS FIRST!
To ensure safe, reliable operation of your EMT-1, please read the following precautions carefully.
eee Choosing a Location for your EMT-1
Avoid placing the EMT-1 in the following locations to
prevent possible damage:
e Locations exposed to direct sunlight or near sources of
heat.
è Excessively cold locations.
* Locations exposed to high humidity or excessive dust.
è Locations subject to vibration or shock.
è Locations next to transformers or motors (e.g. refrig-
erators or similar heavy equipment), fluorescent lighting
fixtures, television receivers, etc. This type of equipment
emits electrical noise which may cause a buzzing or hum-
ming sound from the EMT-1.
E eee Never Apply Unnecessary Force
The EMT-1 is a precision electronic device, and can be
damaged if dropped or subject to strong physical shocks.
Handle it with care.
cj eee The Power Supply
Use ONLY the specified power supply for the EMT-1,
and always turn the power switch OFF and disconnect the
power adaptor from the AC wall outlet after use.
CAUTION:
Do not place the AC power adaptor on top of the EMT-1.
C) eee External Cleaning
Clean the outer case with a soft, dry cloth. Never use
solvents such as benzine or thinner, as these can damage
the finish.
6 eee Connection with Other Devices
Before connecting the EMT-1 to a keyboard or other
electronic device, make sure the power to both devices is
turned OFF.