How To Turn The Power On - JVC KY-D29 Instructions Manual

3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS
3-3 POWER SUPPLY PREPARATION (Cont'd)
How to turn the power ON
i Camcorder type system
1: Set the power switch of the VCR to ON. This turns on both
the VCR and the camera.
2. Set the OPERATE switch of the camera head to ON SAVE or
ON ST-BY.
The camera is turned ON and video is output at the view-
finder.
i Portable VCR system
7. Set the power switch of the VCR or camera control unit to
ON. This turns the VCR on.
2. Set the POWER switch of the KA-27 camera adapter to VTR/
RM. The camera is turned ON.
3. Set the OPERATE switch of the camera to ON SAVE or ON
ST-BY.
The camera is turned ON and video is output at the view-
finder.
Functions of the OPERATE switch of the camera head
CAM (Camera) - OFF Both the camera and VCR are turned off.
ON ON OFF VTR ———— SAVE
OPERATE CAM
co
VTR
ST-BY SAVE SAVE
CAM (Camera) - ON The camera is turned ON but the VCR is put to the power-save mode in
ON ON OFF VTR ——— SAVE which the videoheads and cylinder are stopped.
be used when adjusting the camera head.
ST-BY SAVE SAVE * This position can be used only with a VCR equipped with the power-
save function.
OPERATE ©" As the videosignal can be monitored on the viewfinder, this position can
VTR
CAM (Camera) - ON The camera is turned ON and the VCR is put to the record-pause mode.
ON ON OFF VTR ———— STBY Use this position when you are going to shoot immediately.
"="©). ¢ Some VCRs may not enter the record-pause mode.
VTR
ST-BY SAVE SAVE
28