Technical Support Assistance If further assistance is required, please contact: Product Support at 1.866.907.0122 (09:00 – 17:00hrs PST) or email technical@blubathworks.com North America Blu Bathworks Inc. 188 Smithe Street,Vancouver, BC, Canada, V6B 6A9 T +1.604.299.0122 F +1.604.299.0125 2013-07 1 866 907 0122 blubathworks.com...
Page 3
INSTALLATION STEP 1 INSTALLATION STEP 1 he screw (2). Before installation drill three holes, mmØ27 / inØ1,06 for the spout • screws (4). and mmØ32 / inØ1,25 for the two lateral stop valves. • Before installation drill three holes, Ø27mm / Ø1” for the spout and Ø32mm / Ø1¼” for the Screw the nuts (1) on the threaded rod and the lateral stop valves •...
INSTALLATION STEP 2 • Position the O-rings (2) in its site on the nuts (1). • Screw the nuts (1), as per drawing (A), on the threaded rods. • Once the correct position of the rings is reached, tighten the nuts located under the wash basin mixer to fi x the threaded rods.
Page 5
INSTALLATION STEP 3 INSTALLATION STEP 3 • Place the three small cover plates (1). Place the three small cover plates (1). • • Place the O-rings (2) and screw the cap (3) to secure the cover plates. rods. Place the O-rings (2) and screw the cap (3) to secure the cover •...
Page 6
INSTALLATION STEP 4 INSTALLATIO INSTALLATION STEP 4 Place the centering insert (1) and fix it with the screw (2). Before • • • Place the centering insert (1) and fi x it with the screw (2). Place the control handle (3) and fix the grub screws (4). and m •...
(5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate adjustment, subject to the terms and conditions set forth in this warranty. Blu Bathworks does not recommend exceeding US/Canada maximum hot water ®...
Need help?
Do you have a question about the TSP141 and is the answer not in the manual?
Questions and answers