Subscribe to Our Youtube Channel
Related Manuals for Blu Bathworks TSP511
Summary of Contents for Blu Bathworks TSP511
- Page 1 Thermostatic Floor-Mounted Bathtub Mixer Installation Guide TSP511 2013-07 1 866 907 0122 blubathworks.com ®...
-
Page 2: Installation Requirements
Technical Support Assistance If further assistance is required, please contact: Product support at 1.866.907.0122 (09:00 - 17:00hrs PST) or email technical@blubathworks.com North America Blu Bathworks Inc. 188 Smithe Street, Vancouver BC, Canada, V6B 6A9 T+1.604.299.0122 F+1.604.299.0125 2013-07 1 866 907 0122 blubathworks.com... - Page 3 INSTALLATION Base Fitting - Concrete Floor • Place the base (2) of the column on the floor. Mark hole locating support. • Drill the floor with the references of the holes of the floor base. • Insert the screw anchors (7) into the floor, position the base (2) and fit the screws (8). •...
- Page 4 INSTALLATION Base Fitting - Wooden Floor Note: Blu recommends adding additional wood blocking under subflooring to support this fixture on wooden floors. Note: Screw fixing kit is not supplied for wooden floor installation. • Place the base (2) of the column on the floor. Mark hole locating to support. •...
- Page 5 INSTALLATION Fixing Spout • To fix the spout to the body of the column insert the ring nut (2) on the spout (3). • Engage the connection (1) on the body and secure it in position with the grub screw (5) •...
- Page 6 MAINTENANCE Cartridge change and cleaning Through years of use impurities and lime scale could restrict flow of water through the filters of the cartridge. To clean the filters: • Close the inlets valves water supply • Remove the plug (1), remove grub screw (2) with 2.5mm / 0.09in Allen key(2), take off temperature control (3) and stepped plastic washer (4).
- Page 7 MAINTENANCE Diverter cartridge change and cleaning To clean the filters: • Close the inlets valves water supply • Remove the on/off control lever (1), remove grub screws (2) with 2.5mm / ” Allen key, take off the on/off control knob (3). •...
- Page 8 MAINTENANCE Cleaning Filters If the flow is insufficient, the filters set in the inlets before the check-valves could be obstructed by lime- stone or dirt. In this case, proceed as follows: • Before disassembling the body (2) follow the instructions “INLETS CLOSURE” then remove the two grub screw (1).
- Page 9 TSP511 " [195] " [250] " [30] " [220] " [80] 60” Neoperl ø2" shower hose [50] " [1021] 31" [786] Ø 2" [50] " [70] " [108] " " [145] " 2013-07 1 866 907 0122 blubathworks.com ®...
- Page 10 TSP511 P1293000020 P0000000498 P0000000269 P0000000509 P0000000515 P0000000415 P0000000361 P1293G30102 P0000000016 1/2"G P1293G30101 P0000000468 P0000000471 M12x1 *Flex hose 60" Chromalux P0000000482 L.615mm / 24,21" P0000000468 P0000000472 P0000000511 3/8"G P0000000510 P0000000512 3/4"NPT P0000000470 P0000000341 2013-07 1 866 907 0122 blubathworks.com ®...
-
Page 11: Warranty
(5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate adjustment, subject to the terms and conditions set forth in this warranty. Blu Bathworks does not recommend exceeding US/Canada maximum hot water ®...
Need help?
Do you have a question about the TSP511 and is the answer not in the manual?
Questions and answers