Advertisement
Available languages
Available languages
BEFORE PROCEEDING ANY
FURTHER, MAKE SURE THE SWITCH ON THE
ROUTER IS IN THE OFF POSITION AND THE
SWITCH LEVER IS IN THE OFF POSITION.
The switch power cord can now be plugged into the
extension cord.
MAKE SURE THAT POWER
CORDS FROM THE ROUTER, THE SWITCH, AND
THE EXTENSION CORD DO NOT AND CANNOT
COME IN CONTACT WITH THE ROUTER OR ANY
MOVING PARTS OF THE ROUTER.
ROUTER AND SWITCH OPERATION (FIG. 22)
This section explains operation of the switch with
the power cord plugged into the extension cord. The
router will turn ON when the switch is lifted to the
ON position.
1.
Position the ON/OFF switch on the router in the
ON position. On certain routers this will require the
use of the switch trigger and "LOCK-ON" button.
(Consult router owner's manual.) Make sure the
switch on the switch case is in the OFF position
when doing this.
2.
To turn the router ON, lift the switch to the
ON position.
3.
To turn the router OFF, press the switch to the
OFF position.
NEVER LEAVE THE ROUTER
UNATTENDED WHILE IT IS RUNNING OR BEFORE
IT COMES TO A COMPLETE STOP.
FIG. 22
LOCK
(NOT INCLUDED)
Router Table Assembly
SPECIAL NOTE:
Because some routers come with a special "LOCK ON"
feature, they can not be turned on with the switch
mounted on the router table, but can be turned off by
the switch.
To operate routers with this feature:
1.
2.
3.
4.
WHEN THE ROUTER TABLE IS NOT IN USE
1.
2.
3.
4.
5.
6.
ON
OFF
21
Position the switch to the ON position as described
in ROUTER AND SWITCH OPERATION. The router
should NOT start, even though the trigger lock on the
router is in the "LOCK-ON" position. (Consult your
router owner's manual.)
To start the router, depress the trigger and engage
the "LOCK ON" button on the side of the handle.
THE ROUTER SHOULD START IMMEDIATELY.
If it does not:
a. If the router switch is already in the "LOCK ON"
position, unlock the trigger.
b. Then depress the trigger. THE ROUTER SHOULD
START IMMEDIATELY.
c. Engage the "LOCK ON" button on the side of the
handle.
To turn the router off, press the switch to the
OFF position.
To restart the router, repeat steps 1 and 2.
Press the switch to the OFF position.
Lock the switch with a suitable padlock (not
included). See Fig. 22 for placement.
Store the key to the lock in a safe location
where it is not available to children and other
unauthorized persons.
Unplug the switch power cord from the
extension cord.
Remove the router bit from the router.
Position the router collet assembly below the top of
the router table.
Advertisement
