Table of Contents
Advertisement
Power requirements
Operating temperature
Accessories operating temperature
3.8 V (nominal)
-100C to +55°9C
+ 0°C to +45°C
Battery pack charging temperature
+ 00C to +40°C
Dimensions
139 mm x 45.5 mm x 26.5 mm?
Weight
139 g
Volume
120 cm3
Supplied accessories
Power adapter :
QN-2AC1
(AEP)
QN-2AC2 (UK)
QN-2AC3 (Australia)
Battery (std.)
QN-CD5BPS
Battery (extd.)
QN-CD5BPE
Cigar Lighter Charger QN-2CC
Travel Charger
QN-2TC
Handsfree kit
QN-CD5HFK
EasyCom(SoftModem)QN-2EC
Optional accessories
PC-Card
QN-2PCM
Headset
QN-2HS
Desktop Charger
QN-CD5DTC
Design and specifications are subject to change without prior notice.
This appliance conforms with EEC Directive 87/308/EEC regarding interference suppression.
NOTE
This device contains electrostatic sensitive components. Damage can occur to these components
if the appropriate handling is not adhered to.
Handling precautions:
A working area where Digital Cellular Telephones may be safely handled without undue risk of
damage from electrostatic discharge, must be available.
The area must be equipped _ as follows:
>
All working surfaces must have a dissipative bench mat, safe for use with live equipment,
connected via 1.2MQ2 resistor to a common ground point.
>
A quick release skin contact device with a flexible cord, which has a built in safety resistor of
between
5.2MQ
and
1.2MQ
shall be used. The flexible cord must be attached
to a
dissipative earth point.
>
All containers and storage must be of the conductive type.
Batteries:
This device contains an internal battery in addition to the external battery packs. These batteries
are recyclable and should be disposed of in accordance with national legislation. They must not
be incinerated, or disposed of as ordinary rubbish.
Advertisement
Table of Contents
