Kenwood DP-3010 Instruction Manual page 19

& Changing time display
While random playing in track mode
SINGLE = TIVE
Ft cr.
Ee
& The elapsed time for the whole disc (program)
TOTAL TIME
Pa
| ee
Lo The remaining time for the whole disc (program)
TOTAL = TIME
ond E e e
aI:
The elapsed time for the track
SINGLE = TIME
The remaining time for the track
SINGLE = TIME
Note:
This player stores time information for up to 43 tracks stored in
the disc. When discs having 44 or more tracks recorded on them
are played, or when the total time of the program reaches 100
minutes or more, the time may not be displayed. in such a case
the display may show ——~—:——.
This figure shows DP-3010.
Audio timer
@ Timer playing
Notes:
1. Refer to the instruction manual for the timer.
3. When operating the unit other than the CD player using an audio
timer, be sure to remove the disc from the CD player.