Kenwood DP-3010 Instruction Manual page 15

Eo
The display shows the program numbers
being checked and then returns to required
time after several seconds.
Track numbers being checked
Numbers of all tracks after
the change
The display shows the program numbers
and then returns to total time after several
seconds.
B Checking a program
Press the CHECK key to confirm program contents.
®@ Each time you press the CHECK key, the display ad-
vances by one track (from the start of the program) and
shows the track numbers.
@ Changing a program
2. While the [P.C|] is lit up, input your desired track num-
ber by using the numeric keys.
® Track being played cannot be changed.
@ Playing a program
After completing the programming, press
the PLAY/PAUSE key
® The play indicator (B>) stops blinking and lights up con-
tinuously. Then your tracks are played as you
programmed them.
1. Press the SKIP key | Ppl |to advance to the next program.
2. Press the SKIP key (1¢4] to go back to the program or
previous program.
® The play starts from the beginning of the selected track.
@ jf you press the [144 ]once during play, it starts from the
beginning of that track.
& Stopping programmed play
Press the STOP key (i).
i Adding a track
During the program mode you can add programs to the end
by selecting the appropriate track numbers using the numer-
ic keys.
@ Erasing a program
Press the CLEAR key.
® To erase the program contents from the last track in ord-
er, press the CLEAR key each time.
® All program contents will be erased if you perform any
of the foliowing operations.
@ Pressing the P-MODE key and switching into the
TRACK mode.
@ Pressing the OPEN/CLOSE key 4 when the tray is
closed.
@ If the player is stopped and you press the CLEAR key
as many times as there are tracks on the program.
@ Turning off the power.