WarN_
iadicato_s a_
messa_÷s {_a_tia_ad}
r_\_ (Battery
level
warning)
Slow
flashing
• The battery
pack is nearly used up.
• Depending
on the operating
environitlent
or battery conditions,
_L\_
may flash, even if there are
approximately
20 minutes remaining.
[]
(Moisture
condensation
warning)*
Fast flashing
• Moisture
condensation
has occurred
with the disc. Turn off your camcorder
and leave it lk_r about 1 hour (p. 135).
[l_
(High
temperature
warning)
Slow
flashing
• The temperature
of your camcorder
is
getting
higher.
Fast flashing
• The temperature
of your camcorder
is
extremely
high.* Turn off your
camcorder
and leave it for a while in a
cool place.
_7, (Warning
indicator pertaining to
"Memory
Stick Duo")
• "Memory Stick Duo" is not inserted
(p.30).
g_] (Warning
indicators
pertaining
to
"Memory
Stick
Duo")*
• The "Memory
Stick Duo" is dam,god.
• The "Memory
Stick Duo" is not
formatted
correctly
(p.77, 131 ).
_?._(Warning indicator pertaining to
incompatible
"Memory
Stick Duo")*
• An incomp_aible "Memory Stick Duo"
is inserted (p. 131).
c-, (Warning
indicator
pertaining
to the write-protect
of the "Memory
Stick Duo")*
• The write-protect tab on Ibc "Memory
Stick Duo" is setto lock (p.131).
._ (Warning
indicator pertaining tothe
flash)*
Slow flashing
• Still charging.
Fast flashing
• There is something wrong with the fl:lsh.
"_i_, (Warning
indicator
pertaining
to
camera-shake
warning)
• The an_ount of lights is not sufficient,
so
camera-shake
easily occurs. Use the
flash.
• The camcorder
is unsteady,
so camera-
shake easily occurs. Hold the camcorder
_teady with both hands and shoot the
image. Howeven
note that the camera-
shake warning
indicator does not
disappear.
* You hear a melody
when
tile warning
indicators
appear
on the screen
(p.80).
If messages ,ppear on Ihe screen, follow the
instructions.
•
Battery
Use the "InfoLITHIUM"
battery
pack.
(p.133)
Battery
level is low. (p.21, 133)
Old Battery. Use a new one. (p.133)
• Drive
_-- Drive
error.
Turn
on power
again.
• A problem
nlay haw occurred
_ith tile
disc drive. Turn off and then on again.