Advertisement
Quick Links
SuperMax 19-38 Combo VFD (ME300) Instructions
All parameters and functions for the VFD (ME300) have been programmed for the
19-38 Combo sander at the factory.
Display
STOP/RESET button
To turn "ON" the machine (drum or brush): Pull "ON" the safety paddle switch equipped
on the conveyor control box to run drum or brush. The "RUN" button on the control
panel of VFD is NOT programmed and does not control any functions.
To turn "OFF" the machine (drum or brush): Either push OFF the safety paddle switch
equipped on the conveyor control box or press the "STOP" button on the control panel
of VFD to stop the drum or brush.
For increasing or decreasing the drum or the brush speed (RPM): Turn the speed knob
on the upper right of the VFD control panel clockwise to increase the speed or
counterclockwise to decrease the speed.
Speed (RPM) control knob
MODE button
Suggested speed (RPM)
settings chart
Advertisement
Related Manuals for laguna SuperMax 19-38 Combo VFD
Summary of Contents for laguna SuperMax 19-38 Combo VFD
- Page 1 SuperMax 19-38 Combo VFD (ME300) Instructions All parameters and functions for the VFD (ME300) have been programmed for the 19-38 Combo sander at the factory. Speed (RPM) control knob Display MODE button STOP/RESET button Suggested speed (RPM) settings chart To turn “ON” the machine (drum or brush): Pull “ON” the safety paddle switch equipped on the conveyor control box to run drum or brush.
- Page 2 VFD. To reset, if a fault code appears, press the “STOP/ RESET” button on the control panel of VFD for resetting. The remaining buttons do not have a control or function. Laguna Tools 744 Refuge Way, Suite 200 Grand Prairie...
Need help?
Do you have a question about the SuperMax 19-38 Combo VFD and is the answer not in the manual?
Questions and answers