Haneco STAX G4 Installation Manual

HANECO LED FLOODLIGHT INSTALLATION GUIDE
We strongly recommend that you read this manual carefully before installation.
The luminaire must be installed by professional electrician. Switch power o when wiring the luminaire. Ensure input voltage conforms to
the voltage range of product. Ensure wires are securely connected. Before switching on, ensure that all the wiring is correct. The warranty
WARNING is void if product is not installed according to the instructions.
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
MODEL POWER
STAX30WG4 15/30W
STAX50WG4 30/50W
STAX100WG4 75/100W
MODEL Weight (kg)
STAX30WG4
STAX50WG4
STAX100WG4
VOLTAGE/FREQUENCY 220-240Vac,50/60Hz
Installation Instructions
1. Turn o the power.
Thanks for choosing our STAX
Color temperature E cacy (lm/w)
3/4/5000K 120lm/w @4000k
3/4/5000K 120lm/w @4000k
3/4/5000K 120lm/w @4000k
Max. Mounting height (m)
0.71 5
1.15 5
1.85 5
IP66 Junction Box
*No supplied with product
The terminal block should be complying
with AS/NZS60998-2-1/IEC60998
2. Mark wall with appropriate fixing position, loosen the nut to make the angle adjustments before installing
the bracket with appropriately rated fixing hardware.
For more information
www.haneco.com.au
1300 001 LED
G4 LED Floodlight products.
CRI SDCM Ambient temperature
>80 <5
>80 <5
>80 <5
Max. Projected area (m²)
0.024
0.040
0.066
Dimension (mm)
-20 to 45ºC 155*124*30
-20 to 45ºC 210*168*30
-20 to 45ºC 275*220*35
Last updated 15/08/23