Haneco STAX G4 Installation Manual

HANECO LED FLOODLIGHT INSTALLATION GUIDE
We strongly recommend that you read this manual carefully before installation.
The luminaire must be installed by professional electrician. Switch power o when wiring the luminaire. Ensure input voltage conforms to
the voltage range of product. Ensure wires are securely connected. Before switching on, ensure that all the wiring is correct. The warranty
is void if product is not installed according to the instructions.
WARNING
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
120lm/w
@4000K
MODEL POWER
STAX200WG4 150/200W
Net Weight (kg) Max. Mounting height (m)
2.6
VOLTAGE/FREQUENCY 220-240Vac,50/60Hz
Installation Instructions
1. Turn o the power.
Thanks for choosing our STAX
3000K/4000K/5000K >80
Color temperature E cacy (lm/w)
3/4/5000K 120lm/w @4000k
Max. Projected area (m²)
15
IP66 Junction Box
*No supplied with product
The terminal block should be complying
with AS/NZS60998-2-1/IEC60998
2. Mark wall with appropriate fixing position, loosen the nut to make the angle adjustments before installing
the bracket with appropriately rated fixing hardware.
For more information
www.haneco.com.au
1300 001 LED
G4 LED Floodlight products.
110° IP66 IK08
CRI SDCM
>80 <5
0.087
50,000hr 3 Year
Ambient temperature Dimension (mm)
-20 to 45ºC 336*266*35
Cable length: 1m
Last updated 15/08/23