Wavetek SAM 3000 Operation Handbook page 27

DELETING A CUSTOM CHANNEL
Step 1: Press( FCN)
Step 2: Press{t] or|JJ until display shows the Custom Plan
to be modified.
Step 3: Pres :
Step 4: Press|T} until channel number to be deleted is
displayed.
Step 5: Press and both the video and audio
carriers for this channel will be deleted.
Repeat steps 4 and 5 until all of the undesired
channels are deleted.
Step 6: Exit the custom plan programming mode by pressing
|
Exit the Channel Plan Selection Mode by pressing
again.
FREQUENCY TUNING
Enter digits, then press (FRA),
Incremental Changes: Press or (1) to tune up or down in 125
kHz steps.
CHANNEL TUNING
Enter digits, then press(CHN) .
Incremental Changes: Press (1) or(y) to tune up or down one
channel.
SUB/UHF TUNING
Enter digits, then press i
Incremental Changes: Pres or(y) to tune up or down one
channel.
FREQUENCY TO CHANNEL/CHANNEL TO
FREQUENCY TUNING
Press or to change from on tuning mode to the
other.
In Sub of UHF modes press(FRa)to change from channel to
frequency mode.
Press to change from frequency to channel mode.
22