Ten-Haaft OYSTER 60 Instructions For Use Manual page 7

Hide thumbs Also See for OYSTER 60:

Table of Contents

1. OPERATING THE SYSTEM

The app will prompt you for a few details during the installation process, such as whether you have

the QR code for the FeatureBox. Please note that your FeatureBox will be shipped with three identical labels.

This label contains the Wi-Fi name/SSID and the Wi-Fi password for your FeatureBox. Each FeatureBox has its

own name and password.

One label is already affixed to the FeatureBox at the factory, a second label is also already affixed to this descrip-

tion at the factory. You can affix the third label to a place of your choice.

The label on your FeatureBox always has priority for the operation of your system!

Now the app needs access to your device's camera,

otherwise the QR code cannot be scanned.

Then aim the camera at the QR code on your device. Once the

code has been recognised, the next step is initiated:

Please confirm that you wish to connect to the Wi-Fi as shown

on the screen.

Android

iPhone

1. OPERATING THE SYSTEM

The red or green dot in the lower left-hand corner symbolises the connection status between the ten Haaft app

and the FeatureBox: A red "X" indicates a missing connection, a green dot indicates an active connection. Nor-

mally, the status should change from the red "X" to the green dot after a few seconds. If not, you can initiate the

connection again by clicking on the red "X".

Table of Contents

Oyster 80