Advertisement
Quick Links
701999 46 V Dual Output Power Supply
Installation Guide for PN 701999
1. Tools required: Wire strippers,
drill, and screwdriver.
5. Connect Primary:
CAUTION: Have a licensed
electrician connect primary.
ATTENTION: Avoir un permis
électricien connecter primaire.
2. Supplies required: Electrical
enclosure for power supply, M4 pan
head screws, PLTC cable, silicone,
3M
Scotchlok
connectors.
™
™
NOTE: Ensure adequate ventilation. Power supply operating ambient temperature is -40º to
60º C. Power supply spacing to thermoplastic, wood, fiber, or other combustible type enclosure
materials shall be 1" (25 mm). Two (2) or more adjacent power supplies shall not be mounted
closer than 1" (25 mm) end-to-end or 4" (102 mm) side-to-side. Ensure power supplies are not
overloaded by verifying output current is less than 2.6 DC Amps (each output).
46 VDC output cables
Primary cable
Mounting tabs
3. Power Supply: Identify primary
wires, secondary wires, and
location of mounting tabs.
PAGE 1 OF 2
4. Mount Power Supplies:
Use mounting tab in corner to
secure power supply.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SloanLED 701999
Summary of Contents for SloanLED 701999
- Page 1 701999 46 V Dual Output Power Supply PAGE 1 OF 2 Installation Guide for PN 701999 46 VDC output cables Primary cable Mounting tabs 1. Tools required: Wire strippers, 2. Supplies required: Electrical 3. Power Supply: Identify primary 4. Mount Power Supplies: drill, and screwdriver.
- Page 2 Some or all of the products shown are covered by U.S. and foreign patents pending and covered by For complete details refer to the warranty policy found at SloanLED.com one of more of the following U.S. patents issued: 6776504, 6969179, 7192157, 6932495, 7241031...
Need help?
Do you have a question about the 701999 and is the answer not in the manual?
Questions and answers