Setting - Yongnuo YN-622N User Manual

Setting

1. Power Switch
Power on when the power switch slides
to [ON], power off when the power
switch slides to [OFF].
2. Channel Setting
Short press the[ ] button and the
channel indicator will keep lighting for
several seconds to indicate the current
channel, at this time shortly press the
button again to change channel, and
there are totally 7 channels. Set all the
transceivers at same channel.
3.Receiver group setting
In standby state short press
t h e [ G P / M O D E ] b u t to n to
view the current receiving
groups, then short press the
b u t t o n a g a i n t o s w i t c h
b e t w e e n A / B / C t h e t h r e e
groups.
8