Assembly Instruction - Profi-pumpe FANTASY GZB1020-4 Operating Instructions Manual

3. ASSEMBLY INSTRUCTIONS
l Unpack all the water fountain
components from the packaging
and lie on a flat surface.
l Connect the pump to the rubber
tube. Make sure the plug is
properly seated and cable is not
kinked.
l Push the LEDs into or over the
hose which is pre-mounted on the
well body. Make sure everything is
seated tight.
l Mount the fountain attachment
onto the base. Guide power cable
through the side opening.
l Install fountain top on the base, en-
sure it is stable before continuing.
l Connect power cable to adapter.
l Fill clean water to the container.
Note: Destilled water is recomended to reduce mineral deposits and bacteria build-up.
l Insert the plug into the power socket. If installed correctly water will start to flow from the
feature.
Please note, due to the shape of the slate, some water splashing out of the fountain
is inevitable in the first few seconds.
When all connections are complete, place
the pump at the bottom of the
fountain. Route the power
cable to the outside.
Power
cable
Suction Cups
LED
cable
Water-
hose
Adapter
Hose
Conector
Pump
Fill the fountain with water. The pump must
be completely submerged in water, other-
wise the pump will be damaged.
English 3
1x1
1x4
LED
LED-
Ring