Table of Contents
Advertisement
Details of Setup Disk Software
® ASPIFDBK.SYS
/mem=XXXX
Add this line and specify the memory space's base address to
read the card information by the segment address (hexadecimal
number). You need to exclude this specified address with the
EMS option so that it will not overlap the region of EMS. If you
don't specify the base address, ceOO is applied, and 8 KB of
memory from ceOOO to cffff is used.
/port=XXX
Same as 7port=XXX" in ASPIFMGR.SYS, but address 220,230,
240 and 250 are not available, and if you don't specify the I/O
base address, 300h is applied.
/socket=X
Same as 7socket=X" in ASPIFMGR.SYS.
(Example)
DEVICE=C:\CDRM\ASPIFDBK.SYS /port=280 /mem=c800 /socket=2
© ASPIF365.SYS
/mem=XXXX
Same as 7mem=XXXX" in ASPIFDBK.SYS.
/port=XXX
Since the I/O port is needed for the PC card, add this line and
specify the base address at XXX using a hexadecimal number.
The PC card occupies 16 bytes of space starting the specified
base address. If you don't specify the I/O base address, 240h is
applied. If the specified address is already used, specify another
base address from the following addresses.
140
180
220
230
240
250
260
270
280
290
300
320
/socket=X
Same as 7socket=X" in ASPIFMGR.SYS.
/1365R ST
After setting this option, PCMCIA Controller i82365 should be
reset.
(Example)
DEVICE=C:\CDRM\ASPIF365.SYS /port=280 /mem=c800 /sockets
[ Options for Microsoft MS-DOS CD-ROM Extensions
The format of the MSCDEX program in the AUTOEXEC.BAT file is as follows:
MSCDEX
[/V /K /E] /D:[DriverName] /L:[DriveLetter] /M:[Value]
N
Displays the list of additional information including how much memory is used
by buffers, resident data and resident code.
IK
Type this only when the CD-ROM media directory is written in Kanji (Japanese).
/E
Expanded memory (EMS) is usable if this is available in your system. This
conserves about 16 KB of main DOS memory.
32
Advertisement
Table of Contents
