Table of Contents
Advertisement
Details of Setup Disk Software
About the installation copy
Setup disk contains the following programs (O, © and © ). When installing the
software, programs © and © are copied entirely. However, in case of program
O,
only
one file ( ® ,®
or©
) js copied, depending on your hardware condition ( c®3 table below).
Installation will automatically choose
(D,
® or ©.
O
ASPI Manager
File
Condition
® ASPIFMGR.SYS
when your computer has both Card Service and
Socket Service.
® ASPIFDBK.SYS
when your computer has only Databook CardTalk.
© ASPIF365.SYS
when your computer has neither Card Service nor
Socket Service.
© CD-ROM Device Driver
KMECD.SYS
© Microsoft MS-DOS CD-ROM Extensions
MSCDEX.EXE
Options for ASPI Manager (for sophisticated users)
Each file of ASPI Manager has the following options.
® ASPIFMGR.SYS
/port=XXX
Since the I/O port is needed for the PC card, add this line and specify
the base address at XXX using a hexadecimal number. The PC card
occupies 16 bytes of space starting the specified base address. If
you don't specify the I/O base address, 240h is applied. If the
specified address is already used, you may specify another base
address from the following addresses. Also, depending on the
computer, the I/O port may need to be specified in the Card
Manager. Refer to your computer manual.
140
180
220
230
240
250
260
270
280
290
300
320
/socket=X
When you are using a personal computer with more than two
PCMCIA card slots, add this line and specify the slot at X, where
you are inserting the PC card. If you specify 0 or you don't specify
the slot, the installation program searches all slots, and uses the
first available slot.
Setting this option turns off the beep sound that is generated when
inserting or removing the PC card.
(Example)
DEVICE=C:\CDRM\ASPIFMGR.SYS /port=280 /socket=2
31
Advertisement
Table of Contents
