Paradyne Hotwire 7974 Wall Mounting Installation Instructions page 2

Procedure
To install the Model 7974 unit on a wall:
2
1. Identify the screws provided in the hardware kit. Two screws are required for
each bracket.
2. Using the template provided, mark the placement of the screw holes on the
wall (see Model 7974 Standalone Termination Unit Hardware Template
page 3). The unit can be mounted either vertically or horizontally.
3. Use a screwdriver to install the screws into the wall. Do not install the screws
flush with the wall. Leave enough clearance to hang the unit housing from the
screws.
4. Hang the unit from the screws.
October 2002
on
7900-A2-GZ42-00