Sanyo VEM-S1P Instruction Manual page 9

8 mm camcorder
Hide thumbs Also See for VEM-S1P:
Table of Contents

Advertisement

LITHIUM BATTERY
The date/time imprint function of this unit requires a lithium battery to prevent the loss of the date/time memcry when the
power is switched off.
The lithium battery has a life of approximately 1 year when used normally.
Installing the Lithium Battery
Use the same procedure to replace a worn out battery. (Lithium Battery : CR2025
[3V] )
1.
Open the lithium battery cover.
Lithium battery insertion.
a)
Wipe the battery clean with a dry cloth to prevent
faulty contact.
b)
Insert the battery properly with the + side up.
c)
Close the lithium battery cover.
3.
To eject the lithium battery. press it down and then slide
out of the housmg in diagonally upward direction.
• After replacing the battery. adjust the DATE/TIME.
(See SETTING THE DATE/TIME.)
Notes :
• Keep the lithium battery out of the reach of children.
• Do not grasp the battery with metaliic tweezers, etc., as this is liable to cause a short
Circuit.
• Do not disassemble, subject to heat, or place the battery in water due to the danger of explosion. When discarding,
treat the battery as non-burnable garbage.
• WHEN REPLACING THE BATTERY USE ONLY THE SAME TYPE.

Advertisement

Table of Contents
loading

Table of Contents