Table of Contents
Advertisement
STEP 2 Spacing (applicable models only)
STEP 3 Flooring
Untitled-1 29
1. Open the door and locate the provided
spacers (x2).
2. Unpack both spacers and attach them
to the rear of the refrigerator as shown.
They help ventilate air to the rear wall
and save power consumption.
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each foot of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpet along the movement path.
English
29
2023-10-26
10:55:51
Advertisement
Table of Contents
