Zhone ETHX-2214-DS3 Installation Instructions Manual page 15

Etherxtend ds3 ethernet access device
Table of Contents

Advertisement

5. Write down the current IP Address and Subnet Mask in the Internet Protocol
(TCP/IP) Properties dialog box. When you are done using web management, you
will need to reconfigure your PC with these values.
6. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button
labeled Use the following IP address and type 192.168.254.x (where x is any
number between 3 and 250, inclusive) in the IP Address field.
7. Type 255.255.255.0 in the Subnet Mask field.
8. Click on OK twice to confirm your changes, and close the Control Panel.
9. Start your web browser. Type 192.168.254.252 (for a Provider unit) or
192.168.254.251 (for a Subscriber unit) into the Address field and press Enter.
The web server opening screen appears.
10. Click on >> Next >>. The login dialog box appears. Login using:
Username: superuser
Password: Password
The web management home page appears.
Note – Username and Password are case
sensitive. Enter them exactly as shown
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ethx-2224-ds3

Table of Contents