Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Switch Panel Indication
1 - Indicator lights up to show the circuit is powered on.
2 - Area for DIY placement of the selected label.
3 - Position of the integrated sensor circuit.
4 - Master ON/OFF button, press it power on or off all circuits.
5 - Indicator lights up when you press the Master ON/OFF button.
6 - RGB backlit on when the switch panel is powered on. By default, it's green.
Backlit Color & Brightness
By default, the backlit is in green color, the brightness of the backlit is automatically dimmable according to the
brightness variation of the surrounding environment. The darker the surrounding is, the darker the backlit will be;
the brighter the surrounding is, the brighter the backlit will be.
To change the backlit color, please check below steps:
Press MODE and any other key in the same time, the indicator of MODE turns red. Click or hold the 1/4 button
until the back-lit turns to the color you want, then click MODE and your setting will be saved(If the setting is not
saved within 20 seconds, all changes will be ignored). Holding the 1/4 button will make the color change faster.
Press and hold it for 10 seconds, restore to factory settings: green back-lit, on/off switches.
Advertisement
Table of Contents
Need help?
Do you have a question about the 758CHSCRGB and is the answer not in the manual?
Questions and answers