Paradyne COMSPHERE 6700 Series User Manual page 51

MIB Definition
SYNTAX INTEGER {
self-test(1),
local-loop(2),
rem-digital-loop(3),
loc-digital-loop(4),
dte-loop(5),
bert(6),
local-loop-bert(7),
rdl-bert(8),
digital-test(9),
end-to-end-test(10),
abort(11)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is the test type. Test type self-test(1)
performs an internal self-test of the device. Test type
local-loop(2) places the device into local loopback (for
modems, this is a CCITT V.54 Loop 3). Test type
rem-digital-loop(3) places the device in a remote digital
loopback (for modems, this is a CCITT V.54 Loop 2). Test
type loc-digital-loop(4) forces a local device to loopback
any data received from the remote device (this is useful if
the remote device is incapable of initiating a remote
digital loopback from its location). Test type dte-loop(5)
loops a DSU's data port back to the DTE/DCE interface on a
per-port basis without affecting the operation of the
remaining ports. Test type bert(6) initiates a pattern
test. Test type local-loop-bert(7) places the device into
local loopback and initiates a pattern test. Test type
rdl-bert(8) places the device into remote digital loopback
and initiates a pattern test. Test type digital-test(9)
initiates a digital test of a pair of DSUs or DBMs and
the data circuit between them. Test type
end-to-end-test(10) initiates an end to end test of two
devices. Test type abort aborts the current test."
::= { nmsTestEntry 3 }
––
–– Test Duration
––
nmsTestDuration OBJECT-TYPE
Issue 1 September 1994
A-17