Miele CVA 7440 Operating And Installation Instructions page 88

Installation
The silicone plug is not required again.
Dispose of it with your household
waste.
Pushing in and levelling the coffee
machine
Ensure the mains connection cable
does not get jammed or damaged
when pushing the appliance into the
niche.
 Push the coffee machine all the way
into the building-in niche.
Do not adjust the door hinges to
align the coffee machine. This could
otherwise result in the milk flask not
being able to be fitted correctly and
milk preparation may not function
properly.
 Check the height of the coffee
machine to make sure that it is sitting
centrally in the niche and that it is
level. Align the appliance if
necessary.
You can now screw the coffee machine
to the cabinet.
88
Screwing the coffee machine to the
cabinet
 Open the appliance door.
2 TX20 (25 mm) screws are supplied
with the appliance.
 Secure the coffee machine to the side
walls of the housing unit using the
screws supplied.
 Tighten both screws by hand.
Useful tip: You can remove the door
opening limiters and increase the door
opening angle to 170° so that the screw
on the left can be screwed in more
easily (see "Door opening limiters").
Check whether there is enough room
and that the appliance door does not hit
an adjacent wall.
 Check the operation of the coffee
machine.