Remove the central spout's stainless
steel cover.
Remove the milk valve cover: press
on the recessed grip to unlock the
cover.
On the top right-hand side of the
cover there is a pin which enables
you to swing open the cover.
Detach the milk pipework from the
dispensing unit on the central
spout and from the milk valve
silicone seal ( and ).
Remove the milk pipework that
connects the milk valve to the central
spout.
3
2
1
Cleaning and care
Disconnect the angular moulded
hose from the round hose.
Rinse the hoses thoroughly under
running water.
Do not remove the connecting pieces
from the hoses.
Press the catches on the left and
right of the milk valve holder and pull
the holder forwards to remove it.
Dismantle the holder and the silicone
seal.
61