Toshiba TW-T21BU115UWM Owner's Manual page 7

SAFETY INSTRUCTIONS
INSTALLATIONS
Remove all packaging material and transport bolts before using
the appliance. Otherwise, serious damage may result.
This appliance is equipped with a single inlet valve and can be
connected to the cold water supply only.
Mains plug must be accessible after installation.
Before washing clothes for the rst time, the product shall be Before
washing clothes for the rst time, the product shall be operated once
throughout all the procedures without any clothes inside.
Do not put any excessively heavy objects on the appliance, like water
containers or heating devices.
The new hose-sets supplied with the appliance are to be used and that
old hose-sets should not be reused.
Max. Inlet water pressure 1 Mpa.
Min. inlet water pressure 0.05 MPa.
ELECTRICAL CONNECTION
Make sure the supply cable is not trapped by the machine, it can get
damaged.
Connect the product to a grounded outlet protected by a fuse
complying with the values in the "Technical speci cations table.
The grounding installation has to be made by a quali ed electrician.
Ensure that the machine is installed in accordance with the local
regulations.
Water and electrical connections must be carried out by a quali ed
technician in accordance with the manufacturer's instructions and
local safety regulations.
Don't use multiple plugs or extension cords.
The appliance must not have an external switching device such as a
timer or connected to a circuit that is regularly switched on and o .
Do not pull the plug out of the mains outlet if there is ammable
Chas around.
Never pull out power plug with wet hands.
Always pull at the plug, not at the cable.
Always unplug the appliance if it is not being used.
6