Appendix 1 - Wiring Examples - rako WK-CONNECT Instruction Manual

Appendix 1 - Wiring Examples

The wired system can be configured in one of two ways:
Radial Wired
A single leg of wired devices runs from the RAK-LINK to an endpoint. It is recommended to
wire a return leg back to the RAK-LINK as a spare, each end of line must be set to TERM,
intermediate devices must be set to UNTERM.
STAR Wired
Cables run back to one or more central points, there can be one wired device on a single
cable run or multiple, and the end of each line must have a STAR termination, if there are
intermediate devices they must be set to UNTERM.
WK-CONNECT Version 2.1.2