Advertisement
Quick Links
Installation Guide
A-dec
ICV
®
®
Preference
Product Models and Versions Covered in This Document*
Models
Preference
A
341sp
n/a
397
*Some product models, versions, and options in this document may not be available
in certain regions.
Before You Begin
• Locate the pre-drilled cutout and utility placement
for the installation. Ensure an electric receptacle is
located within the mounting cabinet in a readily
accessible location. The layout for the ICV is
extremely flexible and can accommodate most
operatory configurations.
• Create a cutout in the cabinet for the ICV, if
necessary. Use the drilling template on page 6. If
installing the ICV in existing A-dec Preference
Collection
cabinetry, you can order pre-drilled
TM
panels.
86.0025.00 Rev D
on A-dec Inspire
Cabinets
®
Versions
Description
Dental Furniture
Delivery System
A
Dental Furniture
397 or
®
• Attach the reinforcing bracket to the cutout (X-ray
panel installations only). Orient the reinforcing
bracket to the cutout and attach it. Use the screws and
washers supplied in the kit.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Adec Inspire 397
Summary of Contents for Adec Inspire 397
- Page 1 Installation Guide A-dec on A-dec Inspire 397 or ® ® ® Preference Cabinets ® Product Models and Versions Covered in This Document* Models Versions Description Preference Dental Furniture 341sp Delivery System Dental Furniture *Some product models, versions, and options in this document may not be available in certain regions.
-
Page 2: Recommended Tools
A-dec ICV on A-dec 397 Specialty and Preference Cabinets Installation Guide Recommended Tools Install the ICV Control Panel • 3/32" hex key 1. Attach the ICV control panel to the cutout in the module front. Use the screws and washers provided •... -
Page 3: Install The Control Module
A-dec ICV on A-dec 397 Specialty and Preference Cabinets Installation Guide Install the Control Module 2. Mount the control module on the side of the cabinet. The module clips over the mounting screws installed 1. Loosely install the mounting screws. in step 1 of this section. - Page 4 A-dec ICV on A-dec 397 Specialty and Preference Cabinets Installation Guide Route the Tubing and Wiring 397 Specialty Cabinet 1. Route the ICV’s power plug to the most convenient available electrical outlet, which is easily accessible without the use of tools (usually found under the cabinet subbase).
- Page 5 A-dec ICV on A-dec 397 Specialty and Preference Cabinets Installation Guide (3) Place one or more vacuum tubing on the ICV connectors and open the valves. See the image below for dual panel tubing and wiring routing. Once activated, the normal CAUTION operation of the ICV requires a minimum of one tubing attached with the valve...
- Page 6 A-dec ICV on A-dec 397 Specialty and Preference Cabinets Installation Guide Drilling Template 4" (101.6 mm) 9/64" 3 1/2" (88.9 mm) (3.6 mm) 3/8" (9.53 mm) 3" (76.2 mm) 6 1/8" (155.57 mm) 4" (101.6 mm) 86.0025.00 Rev D...
- Page 7 A-dec ICV on A-dec 397 Specialty and Preference Cabinets Installation Guide 86.0025.00 Rev D...
-
Page 8: Regulatory Information And Warranty
A-dec ICV on A-dec 397 Specialty and Preference Cabinets Installation Guide Regulatory Information and Warranty For required regulatory information and the A-dec warranty, see the Regulatory Information, Specifications, and Warranty document (p/n 86.0221.00) available in the Resource Center at www.a-dec.com. For quick access to this document online, scan, tap, or click this QR code, which points to a-dec.com/regulatory-guide.
Need help?
Do you have a question about the Inspire 397 and is the answer not in the manual?
Questions and answers