Download Print this page

Sealey VS8114 Manual page 2

Camera tablet video borescopes lens diameters 3.9mm, 5.5mm, 8.0mm

Advertisement

5. OPERATION
5.1.
When charged, press the On/Off button (fig.1.3)
to turn the unit on. If the unit has charge, the LED
(section 4.2) will show green.
5.2.
MENU OPTIONS
5.2.1.
To display the menu, press the Menu button (fig.1.1).
5.2.2.
To cycle through the Menu options use the Down arrow
button (fig.1.4).
5.2.3.
When the required option is highlighted, press the OK
button (fig.1.3) to enter the options' choices.
5.2.4.
Use Down arrow button (fig.1.4) to highlight the required
option and press OK button (fig.1.3) to accept it.
5.2.5.
To exit the menu section, press the menu button (fig.1.1).
5.3.
OPERATIONAL CONTROLS
5.3.1.
To decrease bore illumination when in use, press
light down button (fig.1.2). To increase bore illumination
when in use, press light up button (fig.1.4.). The light
level indicator bar will display the light value selected.
5.3.2.
To take photographs, press the Photo/Video button
5.3.3.
(fig.1.5). To record vIdeo, press and hold the
Photo/Video button (fig.1.5).
5.3.4.
To review photos/videos, select the relevant menu option
and scroll through using the up and down arrows (fig.1.2,
fig.1.4). When highlighted press OK button (fig.1.3).
5.4.
ACCESSORIES
5.4.1.
The accessories included with this unit can be used to
retrieve small parts, or provide better viewing into
inaccessible areas. These can be attached to the
camera head using the accessory collar as follows:
5.4.2.
Slide the desired accessory through the accessory collar
and align with the notch inside.
5.4.3.
Position the hook on the end of the accessory behind the camera head.
5.4.4.
Slide the accessory collar over the camera head with the accessory in place, until tightened.
NOTE: These accessories are not designed for lifting heavy objects or pulling with force. Always hold the camera probe in your hand
while using an accessory. Pulling on the LCD unit will put stress on the cable connection and could cause the unit to malfunction. Use
only for small, lightweight objects.
6. MAINTENANCE
6.1.
Keep unit, probe and cables clean and check for damage before every use. If damage is observed, remove from use until unit is
repaired.
6.2.
The battery is not designed to be removed.
6.3.
If the device is not used, it should be stored in a dry place, away from children.
Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Date / Time
fig.1
01284 703534
sales@sealey.co.uk
Original Language Version
Battery
SD Card`
Indicator
Indicator
Here
Here
1
2
3
4
5
www.sealey.co.uk
VS8114, VS8115, VS8116 Issue 1 18/03/22
6
7
Light level
ITEM
FUNCTION
1
Menu / back
2
Up / light down
3
Power on/off, OK
4
Down / light up
5
Photo / Video
6
Charge point
7
SD Card slot

Advertisement

loading

This manual is also suitable for:

Vs8115Vs8116