Table of Contents
Advertisement
PIS75 Service Manual
4-7 Disassemaiy oF Encine, DMD Boarp ano Main Boarp
Sensor Board
Optical Engine
M/B Bracket
t.
Unplug FPC Cable from DMD Board.
os
Linscrew two screws(85.0A523.050 Pan Mech M3*S} and one nut 86.0A 126.060 Nut
Hex M2.6"0.45P) on Main Board and disconnect the connector to remove Main Board.
3.
Unscrew four screws(85.04523.050 Pan Mech M3*5) ta remove DMD Board.
4.
Unscrew two screws(85.0AS23.050 Pan Mech M3°5} to take off Main Board Bracket.
g d h aunchd
Ss Ppap eee ni Aawee y's
ViewSonic Corporation
Advertisement
Table of Contents
