1. Manuals
  2. Brands
  3. Triotech Manuals
  4. Arcade Game Machines
  5. QUBE-AM-001
  6. Assembly manual

Triotech QUBE-AM-001 Assembly Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
QUBE-AM-001
Assembly Manual
Rev. 2.0
Original Instructions
QUBE-AM-001
5 May 2023
This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QUBE-AM-001 and is the answer not in the manual?

Questions and answers

Related Manuals for Triotech QUBE-AM-001

Summary of Contents for Triotech QUBE-AM-001

  • Page 1 QUBE-AM-001 Assembly Manual Rev. 2.0 Original Instructions QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 2 QUBE-AM-001 - Assembly Manual © Triotech Inc., 2023. All Rights Reserved. Triotech Inc. www.trio-tech.com Original Instructions QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 3: Table Of Contents

    Interior Component assembly ....................28 8.3.1 Speakers ........................28 8.3.2 LED IR Supports ......................29 8.3.3 Screen ......................... 29 Continuing the installation of the structure ................30 QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 4 Triotech Service and Support Team Contact ................62 List of Tables Table 1 Symbols Convention ........................6 Table 2 Definitions ........................... 6 Table 3 Acronyms ............................ 6 QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 5: Introduction

    The Qube will be delivered to your location and will include all necessary parts and components to easily install it. In case of difficulty, please do not hesitate to contact Triotech’s Service and Support Team. Triotech Amusement Inc. 780 rue Marion Joliette, Québec...

  • Page 6: Document Conventions

    Person enjoying the Ride. A Rider is a Guest of the Operator. Table 2 Definitions Acronym Definition Human Machine Interface Infrared Special Effects Table 3 Acronyms QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 7: Disclaimers

    The components used in this Qube has been approved following quality control tests at various stages of production. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 8: Health And Safety

    The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 9: Required Tools

    We suggest to limiting the clutch position of the power drill to approximately 9 to make sure to not break the panel. DO NOT USE IMPACT mode. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 10: Handling - Skid And Dolly

    Dolly 03 should be unpacked in the truck and parts transported carefully to the storage area by 2 persons. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 11: Unpacking

    Unpacking Unpacking To be available in the next revision of the manual. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 12: Preparation

    For the pre-assembly, only the regular holes are used. The panels come with pre-assembled screws, which are made to fit the regular holes. The slotted holes will be used later during the assembly to secure the panels together. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 13: Floor Assembly

    (100-5497) X6. All parts have their holes pre-drilled. 2. Do the same for the other side of the floor and lay it down. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 14: Qube Assembly

    Distance between top cabinets (A-01822-DRO / A-01822-GAU) and (A-01823-1) should be approximately 1 to 1.2 inch (25 to 35mm) QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 15 Qube Assembly QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 16: Front Panels

    4. Install the bracket (P-03873) and (P-03874) on the (P-03854-DRO) before installing the panel. a. Use flange screw (100-5497) X2 and flange nut (100-1262) X2 per bracket. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 17 5. Next, the panel (P-03854-DRO) must be fixed in place using the brackets (P-03874) on the side. a. Use flange screw (100-5497) X2 and flange nut (100-1262) X2. b. Use flange screw (100-5497) X2 for the bottom. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 18 QUBE-AM-001 - Assembly Manual 6. The same can be done on the left side using (P-03856-GAU) and (P-03854-GAU). QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 19 8. Fix the center panel in between the left and right panels. a. Use flange screw (100-5497) X3 and flange nut (100-1262) X3 per bracket for P-03871, QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 20: Screen Preparation

    9. Install P-04168-01 and P-04168-02 screen angle on each corner. There is 4X corners. a. Use (100-5871) X2, (100-1212) X2 and flange nut (100-1262) X2 per bracket. P-04168-01 P-04168-02 QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 21 Qube Assembly 10. On the panel P-03855, Install the spacer middle of screen P-03944. Use (100-5871) X2, (100-1212) X2 and flange nut (100-1262) X2. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 22: Wiring

    Players Seats 3 and 4 CON09 LEDs left side panels + LEDs seats 1 and 2 CON10 LEDs Right side panels + LEDs seats 3 and 4 QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 23 1- This opening is used for the harness that goes behind the screen. 2- This opening is used for cables and harnesses that needs to pass through the Projector cabinet. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 24: Speakers And Ir Sensors

    Speaker 02 Center to Speaker center IR Right Top to Right Top Speaker 03 Right to Speaker Right IR Right Bot to Right Bot QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 25: Player Stations

    CON06 to CON06_P Net Switch ETH02 to NES01_ETH02 Net Switch ETH04 to NES01_ETH04 Net Switch ETH03 to NES01_ETH03 Net Switch ETH05 to NES01_ETH05 QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 26: Seats

    COMPUTER SEAT 1&2 to SEAT 1&2 COMPUTER SEAT 3&4 to SEAT 3&4 CON9 to CON9 CON10 to CON10 CON7 to CON7 CON8 to CON8 QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 27: Component Cabinets

    CON04 to CON17 NET-SWITCH ETH01 to COMPUTER ETH02 NES01-ETH06 to NETWORK PROJ IO CARD-USB01 to COMPUTER – USB01 POWER PROJ – POWER PROJ QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 28: Interior Component Assembly

    Always install the speakers so the connectors are aimed toward the screen. 3. Connect the connectors to the speaker. Repeat for all three (3) speakers. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 29: Led Ir Supports

    5. Move the screen (P-03945) into place and turn the screen holders (P-04169) 90° to secure the screen in place. There are two (2) screen holders per corners. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 30: Continuing The Installation Of The Structure

    7. Assemble (P-03883-DRO) and (P-03884-DRO) together using the angle bracket (P-03885). a. Use flange bolt (100-5820) X4 and flange nut (100-1262) X4. 8. Do the same thing for (P-03383-GAU) and (P-03384-GAU) QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 31 10. Install the back side panels (P-03858-DRO) and (P-03858-GAU). b. Use flange screw (100-5497) X3, flange nut (100-1262) X3 and hex flange bolt (100-5469) X2 at the bottom of the panel. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 32 Use flange screw (100-5497) X2 and flange nut (100-1262) X2 12. Once in place, fix the bracket (P-03882) X2. d. Use flange screw (100-5497) X4 and flange nut (100-1262) X4 per bracket. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 33: Roof

    We recommend to not screw the screws too tight; the roof panels will need to be adjusted to ensure that there are no gaps in between the panels. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 34 Use flange screw (100-5497) X2 and flange nut (100-1262) X2 per bracket. 16. Insert the flange screw (100-5497) X9 in all the remaining holes of each panel (P-03859-GAU) and (P-03859-DRO). QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 35: Player Stations

    Use flange nut (100-1262) X9 per panel. 8.4.3 Player Stations 1. Make sure that the Player Station harnesses are passed through the triangle access in the floor. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 36 3. Once the stations are installed, open the doors, and proceed to screw the same screw inside the stations. a. Use the flange screw (100-5497) X4 per stations. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 37: Gun Installation

    5. Connect the HDMI cable in the female HDMI inside the player stations. Use the cable-tie clip to secure the cable in place. Repeat the process for all player positions. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 38: Seat Installation

    Use (100-5199) X4 per base support. b. Use 13mm Hex box. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 39 Before tightened the bracket, pre-align the cover. 2. Install bracket P-03989 and P-03990. a. Use hex bolt (100-0699) X4 per bracket. b. Use 13mm Hex box. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 40 Use bolt (100-0501) X9 per seat with washer (100-0496) X9. b. Use Hex box 13mm to tight it. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 41: Connecting The Motion Seats

    Connect the speaker cable according to the label. Seat Left – Speaker Left and Right, Seat Right – Speaker Left and Right. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 42 Connect the LED connector labelled: SEATS LED with the same connector from the Right Seat. An extension LED cable must be connected from the Right seat to the Left seat. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 43 7. Install the seats on the seats base. a. Use bolt (100-5071) X4 per seat with washer (100-0607) X3 and washer (100-6060) X1. 100-6060 100-0607 QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 44 The connection of the subwoofer is under the sub. There is a hole in the wood panel to pass the cable through. a. Use flange screw (100-5497) X4. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 45: Completing The Installation Of The Structure

    2. Install the panels (A-01943) and (A-01944). a. Use flange nut (100-1262) X5 per panel. b. Make sure to open the LED protector cap using a Philips screwdriver temporarily. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 46: Bottom Led Panels

    2. Prepare the bracket (P-03881) on the panel (A-01946) and (A-01947). a. Use flange nut (100-1262) X4 per bracket. b. Use the hole of the bracket and not the oval hole. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 47 Qube Assembly 3. Make sure to open the LED protector cap using a Philips screwdriver temporarily. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 48 (One at the top, an the other at the bottom of the panel) and close the LED protector cap after installing both panels. a. Use flange nut (100-1262) X5 per panel. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 49: Middle Panels

    The image show the panel already installed, but we recommend installing the markee before and then installing the panel on the structure. 5. Install the center roof panel (P-03862). a. Use flange nut (100-1262) X9. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 50 Use flange screw (100-5497) X2 and flange nut (100-1262) X2. Adjustment might be needed on the bracket of the reinforce tube. 10. Prepare the panel (A-01948). a. Use flange screw (100-5497) X10. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 51 We suggest to limiting the clutch position of the power drill to approximately 9 to make sure to not break the panel. DO NOT USE IMPACT mode. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 52: Middle Divider

    B.H.C.S. M6 X 35MM BLACK 100-1352 FLAT WASHER M6 BLACK CAT-10269 NYLON NUT M6 X 1 100-5497 S.B.H.S. BO M8 X 1,25MM X 20MM QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 53: Component Installation

    3. The front of the projector should align with the bracket of the top panel of the middle cabinet. See the yellow arrow below. a. Align the side of the projector equally as much as possible. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 54: Computer Installation

    If you have 1 card reader, simply punch through the middle one. b. If you have 2 cards reader, punch through the side ones. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 55 4. With a coin acceptor, remove the front middle plate and install your coin acceptor. Connection can be made using the Quick Connect. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 56: Configuration

    2. You should have receive an e-mail with the validation code. Enter it in the blue and yellow rectangle to activate, then you’re all set! QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 57: Projector Configuration

    Qube Assembly 8.8.1 Projector configuration 8.8.1.1 Keystone 1. Press the home button. 2. Select Settings 3. Select Display 4. Select Keystone Correction QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 58 5. Select Four Point 6. By selecting the four corner individually, make sure to align the video projection on each corner of the screen. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 59 3. As much as you can, make sure to see all focus square as clean as possible. This is a try and error manipulation. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 60: Calibration

    It is located inside the computer cabinet. Open the door of the right cabinet. The button will be just under the computer support. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 61 6. Press the trigger. The gun is now calibrated. 7. Do the same for all the guns. Then go back to the Qube game. QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

  • Page 62: Triotech Service And Support Team Contact

    Phone: +1 (450) 760-9082 (Press 1 for Service and Support) Toll Free (US/CAN): 1-888 465-4634 Fax: +1 (450) 760-9348 service@trio-tech.com 24-hour technical support QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 63 ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ___________________________________________________ QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.
  • Page 64 ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ___________________________________________________ QUBE-AM-001 5 May 2023 This document, including the information contained herein, is proprietary to Triotech Amusement Inc.

Table of Contents