Changing Periods - American Standard AccuLink Platinum 850 User Manual

Changing Periods

Changing Period Start or End Times
1. Select anywhere in the Period to make it
active. Other Periods will dim and the Start
and End times for this Period will be in a
black box.
2. Select the TIME START or TIME END and
adjust the time using the UP and DOWN
arrows. NOTE: The Platinum 850 uses
intelligent technology and will not allow
setting an illogical start or end time. Periods
must be at least 30 minutes in duration.
Changing Period Set Points
1. Select the active Period's Cooling or Heating
Set Point.
2. Adjust the Set Point using the UP or DOWN
arrows.
Changing the Period Name
1. Select the PERIOD NAME (Wake, Away,
etc.).
2. Select a prede ned name or select NEW
and select NEXT.
3. If selecting a new name, enter the name
using the on-screen keyboard.
4. Select NEXT.
page 14
To change Periods select: Home Screen > Menu > Schedules & Presets >
Custom Schedule > Select Schedule time
Adjust Start and
End Times
Schedule Mon Tue
6:00 am 8:00 am
Time
78º
Start
Wake
Time
End
70º
Select Apply to save
changes and exit
When all changes have been made, select APPLY
to save and exit, or select CANCEL to discard all
changes that were made to this Schedule.
Press in the red or blue area, then adjust
the Set Point using the up
and down arrows
Wed Thu Fri Sat Sun
6:00 pm
85º
78º
Use the Up and
Down Arrows to
Away Home
change values
62º 70º
Apply
10:00 pm
82º
Sleep
62º
Cancel
Press in the gray area
to rename the period
850 User Guide