Download Print this page

DeWalt DCC1018N Original Instructions Manual page 12

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
English
Package Contents
The package contains:
1 Air compressor
1 Charger
1 Li‑Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li‑Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li‑Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D
WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
Check for damage to the tool, parts or accessories which may
have occurred during transport.
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear eye and ear protection.
Outdoor noise level
Air displacement.
Set outlet pressure to zero before the
air hose is attached or removed.
Air tank capacity.
Oil‑less pump.
Approx. cut‑out pressure.
Tilt compressor towards drain valve
while draining the tank.
Drain tank daily before and after use.
Risk of high temperatures.
CAUTiOn: The compressor contains some parts which might
reach high temperatures.
10
Risk of accidental start‑up. nOTiCE: The compressor
could start automatically in case of a black‑out and
subsequent reset. WARning: Compressor unit may start
without warning.
Date Code Position (Fig. A)
The date code
, which also includes the year of manufacture, is
   
printed into the housing.
Example:
2022 XX XX
Year and Week of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Auto On/Off switch
1
Battery
2
Battery release button
3
Safety valve
4
Tank pressure gauge
5
One‑turn regulator
6
Drain valve
7
Check valve
8
Quick‑connect coupler
9
Carry handle
10
Tank
11
Intended Use
Your compressor is designed to generate compressed air which
can be used for professional finish nailing, stapling and other
compressed air applications.
ThE UsE OF This COMPREssOR in ThE MEDiCAl AnD
FOOD sECTORs, As WEll As ThE REFilling OF OXYgEn
TAnKs, is nOT PERMiTTED.
DO nOT use under wet conditions or in the presence
of flammable liquids or gases. DO nOT use or store the
compressor at temperatures below 0 °C.
Your compressor is a professional power tool.
DO nOT let children come into contact with the tool. Supervision
is required when inexperienced operators use this tool.
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.

Advertisement

loading

This manual is also suitable for:

Dcc1018