Advertisement
Available languages
Available languages
Optional Accessories
WARNING: Since accessories, other than those offered
by D
WALT, have not been tested with this product, use
E
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
Replace blade guard when worn. Contact your local D
service centre for details on a blade guard replacment.
sAW BlADEs: ALWAYS USE 210 mm noise reduced saw blades
with 30 mm arbour holes. Blade speed rating must be at least
6000 RPM. Never use a smaller diameter blade. It will not be
guarded properly.
BLADE DESCRIPTIONS
Application
Construction saw Blades (fast rip)
General Purpose
Fine Crosscuts
Woodworking saw Blades (provide smooth, clean cuts)
Fine crosscuts
Protecting the Environment
Separate collection. Products marked with this symbol
must not be disposed of with normal household waste.
Products contain materials that can be recovered
or recycled reducing the demand for raw materials.
Please recycle electrical products according to local provisions.
Further information is available at www.2helpU.com.
WALT recommended
E
WALT
e
Diameter
Teeth
210 mm
24
210 mm
40
210 mm
60
English
17
Advertisement
